...fuel pump that if you listen carefully with no radio on, you will hear it whir and begin pumping it will then go silent. But if you hear nothing your pump is either shot or has a loose wire, or the ...
...pump up ,on the fuel rail is what looks like a tyre valve ,push the valve head in and see if the petrol squirts out ?? if it doesnt then remove the pump and clean it out ,also check it manualy away ...
...fuel pump)? Please advise. Mahalo The poor performance of the car makes these faults to come up and undermine the working of the engine thereby resulting in the engine not firing. So to start off we ...
...contact with the Injection Pump module. So the computer doesn't know what the pump is doing or sending. Could be a cut in the wires, corrosion, etc.. So many things it could be, fuel pressure is
...fuel pump, fuel filter then towards the high pressure pump (for fuel injected) or the carbs. It may be simpler/faster to simply drain all the fuel from the tank to the injector pump/carb and there ...
...fuel pump/carburetor as the fuel mixing and pressure is determined in this section. You need to have the pump calibrated if the pressure at the injector is low. Then we must check with the electrics. ...
Question about Mini Cooper
...leak, ignition cap, rotor, wires, plugs, Check plugs and make sure all air intake is tight check fuel pressure too if the pumps going bad it will surge and run ...
Question about Cadillac Cars & Trucks
...fuel pump New fuel pump came with different color wires then what is on the top of the pump Here's a wiring guide for the fuel pump on a 2000 Cadillac Deville: 1. Remove the fuel tank and access the ...
Question about Ford Cars & Trucks
...fuel pump into a 1999 Ford Ranger that has a wire for a flexfuel sensor on the truck harness, but not on the replacement fuel pump? Before you begin, it is important to note that modifying electrical ...
Question about Mini Cooper
fuel pump wiring diagram for my 2001 Chevy Silverado 4.8L engine. I need to probe the harness plug at the fuel pump to determine if it is a voltage supply problem or the pr oblem is in the pump itself
428 questions posted
Usually answered in minutes!
384 Questions
275 Questions
253 Questions
183 Questions
98 Questions