1983 De Lorean DMC-12 "adjust torsion bars" Questions

Ad

Question about De Lorean DMC-12

1 Answer

...the correct, proper struts, which we can be supplied by DMC. Unqualified persons should never attempt to adjust the torsion bar(s) as severe personal injury and extensive physical damage are

Ad

Question about De Lorean DMC-12

1 Answer

torsion bars I set the adjuster key perpendicular with the lower control arm as in tangled down. The correct reload would be to have the key level with the ground? or is the setting I started with ...

Ad

Question about De Lorean DMC-12

1 Answer

...adjust a torsion bar describe how to adjust a torsion bar on 1994 s10 blazers Step 1Jack up the vehicle on the wheel to be adjusted, and set the frame rail onto a jack stand. This is to release the ...

...adjust the Z height as outlined in the wheel alignment portion of this section. Hello. The torsion bar is part of an automotive suspension consisting of a bar that twists to maintain stability. ...

...torsion bar it should be sitting a bit low at this point adjust up the adjuster bolt to when it sits level if there is not enough adjustment the jack up the car again let the adjuster right off an ...

adjust the torsion bars both lock nuts are loose but wont move is the wedge type washer threaded or not when adjusting torsion bar suspension ,the secret is to jack the car completely off the floor so

Question about De Lorean DMC-12

1 Answer

torsion bars can be removed and replaced,trial and error style,until it's right.The thing that changes where the ride height is,is WHERE the adjuster end is,when the torsion bar is fitted to it.I have

Question about De Lorean DMC-12

1 Answer

adjust the front torsion bars? loosen of the lock nut on the adjuster bolt and then turn it in to increase the tension in the torsion bars if turning that bolt is difficult then a jack under the front

...adjust the torsion bars on 2000 gmc sierra Adjusting the torsion bars will throw the camber off and eat up your tires. ... Besides, those suckers have some *serious* torsion on them. Without the ...

...torsion bars and a sway bar, but I do not know how to adjust them to make it sit level. Any help on this one? Thanks Glen Adjustment is made by way of the torsion bar adjuster at the rear of the ...

Not finding what you are looking for?
Cars & Trucks Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top De Lorean Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a De Lorean Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...