2003 Hummer H2 "head" Questions

how do i tighten the head bolts of a hummer h2 2003? If you think you have to tighten head bolts, what are you trying to fix? I can tell you its not going to work.

2003, h2. how do i remove old stock head lamp form grill ?Already removed the nuts on inside. lamp will not push through.I do not want to force it, thats why I am asking. IS THE CROME GRILL IN THE WAY

...do with the power? I finished my H2 key issue today. Here is what I had to do; You will need a flat head screw driver, a phillips head screw driver, a 2"round mirror, the smallest 6 point star ...

...the Ignition Lock Solenoid under the top steering wheel trim. Lower the steering wheel, use a flat head to separate the trim pieces, remove top trim and you'll see the Solenoid inside same side as ...

...on where on my 2003 h2 coolant sensor is located?? ECT sensor is located on front of left cylinder head, above spark

...no engine light on and run perfect, just the smoke that i do no like. Sounds like a blow or cracked head gasket, the white smoke is either water or coolant being burned in the motor. With this type ...

...PRESSURE GAGE AND SPEEDOMETOR STARTED TO GO ERATIC AT THE SAME TIME suspect a BCM unit ,the speedo head in common terms ,its has complicated electronics built into it ,and this i think is your ...

Hi I installed a over head dvd player in my suv it will play and dome lights will work until I shut off, then I come back and turn it on it will not work until I disconnect power and reconnect it then

...noticed it's running about 20psi gauge Take it back to the lot asap and make them fix it Poss blown head gasket, exhaust coming through your dipstick tube. Get that back to the seller. DONT MENTION ...

head lights pointing down need to adjust any help Theres an adjustment screw for up and down and also a screw for left and right, you can go to a parking lot and ajust them your self you will aim the ...