...starter with hammer or heavy bar. Sometimes you can't swing the hammer, then try poke with bar. TAKE GREAT CARE TO AVOID THE WIRE AND CONNECTORS . Guy holding key should be prepared for it to kick ...
...switch. If still nothing try tapping the starter motor with a hammer and try starting. If it starts you have a bad starter. Alway's check you cable ends on the battery for carrosion, Wish ya
...starter that bolts to the transimission iv got the bottom and middle bolt lose but i can't get the top bolt lose it is sripped first spray it really good with P.B buster or something along those line ...
...starter is pulled out of the way, spray liquid wrench or some other type penetrating oil onto the remaining stud, let it sit for 20 min, and then begin removing it with a pair of vice grips, channel ...
...the problem.its proberbly sticking. Make sure its out of gear and when you turn the key get someone to tap the starter with the end of a bar or big spanner or if you can get at it a
...tap test when the starter doesnt work take a rod and hammer... no im not joking, put the rod on the starter/ soliniod DO NOT TOUCH THE WIRES and tap it with a hammer( DONT "HAMMER" ON IT THOUGH) just ...
...tap with hammer if poss... you need to have in rebuilt or i suggest give it a tap with a hammer and then try it but u will need a starter soon you can only tap it for so long before it completely ...
...into the bell housing, so try and tap at an angle from the rear of the starter towards the front of the ford, as that is the direction it will be removed. Let me know how you make out. ...
...caution where you tap and with what you tap with, you may damage parts or get shocked if you use metal and touch the terminals. I'd suggest a wood broom handle and tap the body of the starter. ...
464 questions posted
Usually answered in minutes!
900 Questions
787 Questions
686 Questions
613 Questions
634 Questions