...car window on drivers side, I can't roll down car window on drivers side, I tried to take panel off door but couldn't get it all the way off, can you tell me how thanks there is a clip on the window ...
Question about Hyundai Accent
Window hard to roll . How to grease mechanism? 1983 toyota picku Window hard to roll up. How to grease mechanism? 1983 toyota pickup you will need to remove the door panel to get to the gears. It's ...
Question about Hyundai Accent
...HARD FIRM RAP.The window should roll up.It may take a few tries.DO NOT roll the window back down until you have changed or dissembled the window motor for a good cleaning.Also,check for broken wires ...
...window regulator, common problem in BMW. It's not hard to replace, but if not mechanically inclined, better to take to a dealer or your independent BMW technician, the part is not terribly expensive ...
Question about Hyundai Accent
...car window wont roll up or down, it just wants to slide down and up my window wont roll down or up the motor works and its trying to roll it up and down but it just wont do it i can slide the window ...
...window now it won't roll back up How do I fix this you can try to hit the bottom of the door on the inside real hard and see if it goes up i use a mallet you are going to have to get a new window ...
...window motor out? Any idea what the cost is to have it fixed? Is there an easy fix? if it was running slow then yes i would say the motor died. to replace you have to take the door panel off not too ...
...bad switch or window motor. Your most likley going to have to remove the window from the regulater to get it up. mine is electric, sometimes i bang hard overtop the motor which is up near the ...
...Window is hard to roll up My window is hard to roll up. I replaced the window regulator and it has helped but I have noticed when I roll up the window the front of the window leans forward. The back ...
...window is very hard to roll down and I can't see how to remove the window crank handle. there will be a wire clip at the back of the winder, you will be able to push this out using a trim fork, or 2 ...
707 questions posted
Usually answered in minutes!
1,131 Questions
1,082 Questions
1,047 Questions
500 Questions
255 Questions