1996 Hyundai Accent "replacement starter" Questions

starter was replaced sounds like teeth are not meshing right is there a shim that goes with the starter old starter was making noise and freezing up it would sometimes bind up when starting and would ...

I have a 2004 hyundai accent. the starter went bad two weeks ago, and a friend and I replaced it. (it wnt without warning ) The other day, it went again. I'm told it could be in the ignition. That ...

how do I remove and fix a starter on a hyundai 1997 accent how do I remove a starter on a hyundai 1997 accent 1.5 Then need to possibly repair bendix or solinoid. I'm told this is probably the problem

can't findthe starter can't find the starter hi if you follow the positiv/red battery lead down to its other end at the rear/bulkhead side if engine you will find it connects to starter solenoid part ...

car will not start timing belt replaced, catalystic convertor replaced, car would not start ,timing ok new battery new starter, fuses ok no electricity going to starter. Try running a wire from the ...

2002hyundaisatafe how to replace starter Disconnect the negative battery terminal, jack car up and remove the small and big cables from the back of starter, next remove the bolts holding the starter, ...

I need to replace the starter on a 2001 Hyundai accent. How do I do so? 1. Raise front of vehicle 2. Disconnect Negative Terminal of Battery 3. Remove Intake Air Box & Hose (air filter box) 4. ...

non starter hyundai will not start even after continually turning the starter motor but will start with a push almost straight away. no fault codes on ecu can you help? try replacing starter motor. ...

accent 2001 wont starter starter wont engage i notice that lowet cable on starter is fryed is this cable going to where secondary relay or to selonoid? i am told by retards mechanic it is the starter ...

can't find starter to replace it rear of motor,first disconnect neg battery terminal , remove speedometer cable from trany, disconnect shift cable, remove wires from starter,and then unbolt starter ...