1994 Eagle Summit "engine" Questions

Ad

Question about Eagle Summit

1 Answer

engine light stays on even after oil change and air filter An oil and air filter change will NEVER fix a check engine light. It would be helpful if you brought your car somewhere to scan the engine ...

Ad

... Also It won't change gears at the right speed, last gear change is 62 mph. Blue smoke is caused by engine oil entering the cylinder area and being burned along with the fuel air mixture. As with the ...

Ad

1.5L mitsubishi engine still missing/sputtering..etc no water in tank,engine still missing/sputtering severely around 1700-2100rpm has a hard time to maintain 50km/h(constant) wants to die, then, with

Question about Eagle Summit

1 Answer

...the transmission. My son and husband looked too and they know about cars. it is on left side of engine looking from the top. its a small usually small plastic ball about a half inch in diameter

Question about Eagle Summit

1 Answer

WHERE IS FUEL FILTER ON 1995 EAGLE SUMMIT? It should be under the hood, near the center of the engine compartment, rear of the engine area / rear of intake manifold and is mounted in fuel line ...

1.8 engine leaking in front of the engine replace the head gasket. the gasket had a rubber formed oring that blows out. i just replaced it on mine

Question about Eagle Summit

1 Answer

find fuses for blower motor In the fuse block in the engine compartment. There, also, may be a low current fuse under the driver's side dash. But, the high current fuse (fuseable link) is in engine ...

What is the rocker shaft torque spec on on 2.4L engine? the car is an eagle summit wagon with a 2.4L SOHC engine. My book calls for only 2.1 - 2.5 ft/pds. That seems way low. These are 8mm bolts that ...

Question about Eagle Summit

1 Answer

what causes an engine to overrev? engine over reving lots of stuff can cause an over-rev condition. Usually a binding throttle cable but vacuum leaks are notorious for high rpm.

...relay? Where is this relay located? Sounds like a timing belt has snapped. If it is an interference engine, the engine could be ruined (pistons hit the valves and bend them). Check gates belts to see ...

Not finding what you are looking for?
1994 Eagle Summit Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Eagle Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

john h

Level 3 Expert

29494 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...