2004 Kia Optima "scan negatives computer" Questions

...computer controlled, if the system fails the gauses all stop. You need the dealer to scan this with the KIA tool. unplug the battery negative cable for 2 minutes..then plug it back.. what's going

negatives. Two or three mirrors then reflect the image through different filters and lenses until it reaches the CCD (Charged Coupled Device). Some scanners, such as Canon's Canoscan, use infrared

...the long adaptive fuel stratagy.To reset the parameter youll need a generic scan tool. Only a generic scan tool can reset the computer. There is a prom and ram. those are set and cannot be ...

computer has to relearn the settings that control everything. it is best to go to a shop and have it reset correctly. Scan and reset with a code scanner/reader. If youd like to scan your codes without

...per scan 1995 blazer I replaced right front sensor per scan tool and the light is still on 1995 blazer Remove negative battery cable for a couple of minutes to reset computer if you haven't

computer. It doesn't matter because there is no reset button. You need a scan tool or disconnect the negative battery cable for 5 or 10 min. Is the vehicle check engine light on , is that what's going

...code said it was my egr but replaced that and still does it. what else could be wrong get it scanned. and try to see whats the problem, reset the computer, take out the negative battery ...

...scan tool hoked up computer temp starts going to the negative with engine at 180 degree temp on scan tool reads -40 and car runs realy poor at low rpm have replaced sencer and its not that Check your ...

...scan your computer for free. Post the code back and I will tell you my opinion of what the possible cause is. Disconnect the battery (-) negative cable for 30 seconds and reconnect. If the engine ...

...computer system) memory- after the system has time to reset, reconnect the negative terminal and give it a shot...It should reset the ECM however if your husband changed any settings during his scan ...