2002 Kia Rio "idle air control sensor 2005" Questions

...idle faster when the air cond is on ..if not it may be the sensor that controls idle ,it has to go faster to compensate load ..anyway your radiator could be blocked feel the top hose n bottom should ...

...idle air control valve. It should be on top of the throttle body. I'm not sure on this vehicle. It is a accordian like diaphragm in a housing, They get clogged with carbon. Usually attached with 2 ...

...Air Control Valve (IAC Valve) and the Throttle Position Sensor (TPS) both were in nominal ranges. So I then thoroughly cleaned the carbon from the IAC and Throttle Body. The change was immediate the ...

idle air control,throttle position sensor and mass air flow sensor. It is better but still idles too fast driving for the first few miles while I am in a 25 mile per hour speed zone. you might have to

...Idle Air control. 2005 Mitsu Endeavor with p0506 Idle Air control stored. Veh is new to me w/84k miles. Any usual suspects for this code? Maintenance before me is unknown. One website suggested to do ...

...ValveDamaged, Loose, or Faulty Idle Air Control Valve. 4InspectIdle Speed ActuatorDamaged, Loose, or Faulty Idle Speed Actuator. 5InspectIdle Stop SolenoidDamaged, Loose, or Faulty Idle Stop ...

...and rough idle rough idle while driving and acceleration sluggish you may also want to check the idle air control and the mass air control sensor, if not working properly they can cause both ...

...air idle valve is responsible for controlling the idle so it might be that, they do become stuck with build up of carbon often, you can usually remove them and clean with brake cleaner to get working ...

...any advise for this? Is the car idling high? It sounds like air control valve has gone bad..just a though. I know when a car isn't idling right, its usually that idle air control valve or a vacuum ...

...idle air control motor cleaned. there are no idle adjustments on this engine. typically the idle air control valve becomes gummed up with carbon. while cleaning the valve you may also want to clean ...