2001 Kia Rio "13 drive belt" Questions

...13. Install lower and upper timing belt covers in that order. Tightening torque: 5.8 - 8.0 ft. lbs. (7.9 - 10.7 Nm, 0.8 - 1.1 kg-m) 14. Install timing belt guide plate and crankshaft pulley. ...

...across the terminals with the engine running. If lower than 13 volts, then replace alternator.I'm assuming the alternator drive belt is adjusted correctly and the engine idle is above 500

...13 ft. lbs. (12-17 Nm) Connect the negative battery cable. 1.6L (VIN 3) & 2.0L Engines Before servicing the vehicle, refer to the Precautions Section. Remove or disconnect the following: Negative ...

...Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine 1998 Ford Escort Serpentine Belt ...

The drive belt mechanism is not functioning properly . How do you get access to adjust the belt/belts and how tight must they be to drive properly .Model E III 13 Drive belt on what?

...13: Drive belt routing-2.0L DOHC engine I need a diagram for replacing a serpentine belt on a 2003 Ford Escort ZX2. 2.0 liter engine. can u send me a diagram for 2000 ford escort dual cam i need a ...

...and thanks for using FixYa. Fig. Fig. 13: Drive belts-4.9L EFI engine Fig. Fig. 14: Drive belts-5.0L and 5.8L engines Fig. Fig. 15: Drive belt adjustments on the 4.9L, 5.0L and 5.8L EFI ...

...Drive Belt Tensioner 9 N806020 Bolt 10 2882 A/C Compressor Mounting Bracket 11 3A674 Power Steering Pump 12 N606572-S2 Bolt 13 N800199-S8M Bolt 14 N620481-S2 Nut 15 3C718 Brace 16 N606068 Bolt 17 ...

...drive belt from the power steering pump (13 Slowly return the tensioner to the original position. Remove the belt.INSTALLATION Thread the drive belt through all the pulleys except for the power ...

...Drive Belt Adjustment Bolt (Part of 8678) 13 8678 Water Pump and Power Steering Pump Drive Belt Idler Pulley 14 ? Water Pump and Power Steering Pump Drive Belt Idler Pulley Locknut (Part of 8678) 15 ...