1999 Kia Sportage "waterpump" Questions

Ad

...just not flowing correctly?bubbles quick in az! not bad yet!! almost overheating,thermostat?waterpump? while your car is running and, warmed up; squeeze the top radiator hose; if you feel ...

Ad

no cam crank sync after waterpump change on 2001 intrepid 2.7 When you did the water pump there are timing marks to get the belt on right that's and interfernce engine so the timing marks have to be ...

Ad

engine is overheating even after replacing waterpump,thermostat and radiator cap If you replaced all that, it very well could be your antifreeze/coolant. Make sure that your coolant level is at a good

...overheating start by flushing the cooling system then try the thermostat and if that dont do change waterpump do not have solution. but i have 2000 sportage that over heat. scoolant does not run out ...

i have a 1999 kia spotage that over heats when it gets hot. i have changed the waterpump the termoste and the clucth fan and flushed the radator. what else needs done How do you know it over heats? If

Question about Kia Sportage

1 Answer

waterpump how to replace waterpump pull out your coolant res.pull off your belt.you will see the old waterpump.remove all four bolts.clean off gasket off waterpump mount on motor.place gasket.install.

Question about Kia Sportage

1 Answer

procedure on changing waterpump first drain the cooling system. loosen bolts on the waterpump pulley and remove the inner fender cover on the pass/side. remove the surpentine fan belt, note; make a ...

...steering belt pulley to change the water pump? no, just remove the belt, then the cover over the waterpump then the waterpump pulley,NOTE; loosen waterpump pulley bolts before removing the ...

Question about Cars & Trucks

1 Answer

rodeo waterpump blew now wont start Why after my waterpump blew (is my 4x4 not running now) it wants to fire but wont.. tried jumpstarting and it turned over really quick. It wanted to start but no ...

Question about Kia Sportage

2 Answers

waterpump removing fan need to remove fan Well, if it's a 5.0L engine, remove the 4 bolts holding the fan to the pulley. If it's a 4.0L engine, you need to hold the waterpump pulley still and break ...

Not finding what you are looking for?
1999 Kia Sportage Logo

1,108 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Kia Sportage
2000 Kia Sportage

1,074 Questions

2001 Kia Sportage
2001 Kia Sportage

1,058 Questions

2002 Kia Sportage
2002 Kia Sportage

918 Questions

2006 Kia Sportage
2006 Kia Sportage

343 Questions

1998 Kia Sportage
1998 Kia Sportage

275 Questions

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...