...cap filter wrench to undo it. I've tried a set i borrowed and couldn't find one to fit. I had to make a tool in the end by taking a bolt with a head to match the hex shaped piece at the bottom of the ...
...size socket to remove oil filter cannister from a 2009 Toyota Highlander? K-D Tools 3253 End Cap Oil Filter Wrench This is a comment for this filter wrench I found on amazon.com here is the ...
...size or type tool use to remove cover of oil filter housing and do you have to remove oil filter housing FROM the engine? THIS IS A 1998 MERCEDE BENZ E320 no you don't have to remove the oil filter ...
...size cap wrench and drain plug hex socket do I need for a 2007 mazda 3 with 2.3 engine Hi see my previous post "oil filters" which basically the same as this there is a special tool for removing the ...
...tool do i need to remove oil filter cap and if it is too hard to remove. i need to replace oil filter but no one has been able to do so the correct cap wrench is 74 mm with 15 flutes. You can't ...
...size is I need to change the oil and oil filter. What tools do i need and where is the oli filter located? Make sure your car is off and cool (cannot have been running for the last hour as the oil ...
tool while at the store to make sure you get the right size. Jack the front of your eldo on the passenger side or drive the car up on ramps. Make sure it is secure. Open the hood and remove
...on ,your familar withUnder that cap you found on top of the engine is the filterYou will need an extension & a good size metric socketIf you need the size I can check my tools or catalog for ...
...any parts house. There are always parts books there to help you select the proper filter by number or they can look it up for you, then look at the filter and select the proper size tool to remove
1,120 questions posted
Usually answered in minutes!
1,706 Questions
907 Questions
348 Questions
103 Questions
32 Questions