...2.Ignition cylinder has been removed from the vehicle but I need to open up the cylinder.I need the schematic for this so that I can open it up and retrieve the key end dont even try it,,, you will ...
...2 button keyfob didnt help either. It has the 10 AS ECU. How can i solve this? NOTE: No synchronization required after battery replacement. How - 1996 NOTE: Remote control contains a transponder and ...
...2 bleeps, now wait ten minutes for the alarm to turn off, the red light on the dash will blink really fast and the hazards may go off once, now you have 30 seconds to get your key in the ignition and ...
2 lights were flashing (S and M?) and the manual said it could be an electrical fault in the ignition box...could all this be related? Also, outside temperature reading on A/C is not working What work
...ignition ON and OFF three times then back to the ON position within seven seconds. 2) The LED on the dashboard will light up signaling the unit is in programming mode. 3) Touch an already programmed ...
...ignition off the hazard lights continue to flash so had to remove the fuse for them. I have checked all the fuses and fusable links and all are ok. I have tried using 2 separate keys. Central locking ...
...2 hour. Changed ignition switch - ran like champ from Oct 09 - May 10. Hot that day like last summer - starter turns no ignition AND windows don't go up, radio doesn't work and when plugged in OBD II ...
...2 alarm problem I bought this vehicle 2yrs ago and within 4months the first thing I noticed was that as I was driving around a roundabout my fuel gauge registered empty and several lights on my dash ...
317 questions posted
Usually answered in minutes!
318 Questions
325 Questions
215 Questions
235 Questions
219 Questions