2001 Porsche Boxster "loose shifter arm" Questions

enough, to bypass it when the shifter is in Neutral, but not far enough when the shifter is in Park. 2.Perhaps the Neutral safety switch is bad, or has come loose on it's mount, and is out of position

shifter is loose, when it is in the park position the truck will roll until i push the shifter arm up a little more same goes to starting the truck if the shifter isn't up all the way it won,t

...the shifter is very loose up and down ,but the dash shows still in 3rd gear? The other end of that shifter is on top of the transmission.at the end of the cable. Check there for loose or worn ...

light look under and jiggle the shifter arm. There is a bolt (I think it's a star shaped so you need to buy it) connecting 2 parts of linkage. It will be loose. Screw it and shifter arm will be as new

where do cables go? cables loose from arm rest to motor.dangling loose shifter cables go to your missing shifter.

...shifter but its loose and doesn't engage four wheel drive Check to make sure it is connected at the transfer case. The shifter bushings become worn and break and allows the linkage to fall off the ...

...shifter pops onto keeps popping off the little ball what is that part called the little ball part the ball is not bad, the arm needs replacing the socket's on the arm, it's loose No repair, just ...

shifter is loose on my 1993 Ford Crown Victoria LX. It moves freely between park and neutral, and will not engage into park or reverse. It does engage into the forward gears, though. What could be the

...rods loose and put shifter in neutral, and transmission arms in neutral, then adjust the rods so they slide in. Then your shifter matches your transmission and you should be able to shift just

...shifter. Look up from the floor board at the column. You will see the shift cable attached to a metal shift arm. Where this arm is bolted to the column with two bolt, tighten the bolts they should be ...