1998 caviler when brakes are applied engine revs up When I press the brake pedal I hear A hissing noise and the engine revs up, then tries to die when the brake pedal is released. Hello; Yoou most ...
Question about Hyundai Tucson
...after you install the new brake pads. Try not to do any hard stopping when you are seasoning the
Question about Hyundai Tucson
...anti-squeak compound for your specific brake pads. Once you install them, you will need to bed the brakes to get the most use out of them. Accelerate to 30mph, then hard brake to zero (5-10 times), ...
one notch. If it does not operate properly, replace it. 4.After the adjustment, check that the rear brakes do not drag with the parking brake lever released
...BRAKE 1 CLICK TOWARD ENGAGEMENT.REMOVE FLOOR CONSOLE.TIGHTEN THE ADJUSTING NUT UNTIL THE PARKING BRAKES DRAG SLIGHTLY WHEN THE REAR WHEELS ARE TURNED.RELEASE THE PARKING BRAKE COMPLETELY.CHECK IG ...
...a clanking and grating noise at the front wheels when braking to a slow stop. Hve you had the brakes checked. Sounds like the brakes are grinding I would have the brakes checked out. Then as ...
have an hyundai terracan 2004 and i have recently just change the brake pads but somtimes the brake feels like it gone real stiff and wont brake to a hault it seems to be more in the morning when its ...
When the temperature drops below zero my brake pedal is solid and won't budge, the brakes don't work and the brake warning light also comes on when this happens. When the temperature warms up the ...
Question about Hyundai Tucson
the brakes lights don't work. can't tell which fuse to replace, manual does not explain well enough went to Auto Zone and they could not figure it out You have a high mount brake light. Press the ...
992 questions posted
Usually answered in minutes!
538 Questions
117 Questions
101 Questions
76 Questions
67 Questions