2002 Hyundai Accent "need replace clip holds rear" Questions

Ad

...to pay a fortune to have garage fix, is this an easy DIY fix? Any help is appreciated! You will be needing to disassemble the whole rear door or lid. Inside you may find a plastic part broken. You ...

Ad

need to replace the rear driver side axle of my 91 Lexus LS400 My axle slides about 2 inched (into the differential and back the other way to the wheel) this causes a clanging when I press on the gas.

Ad

...replace the bulbs illuminating the rear license tag on my 2005 Hyundai Accent. And neither can I. Looks like it needs a miniature, 90-degree capable screwdriver. A slightly better set of instructions ...

...replace licence plate light on 2005 hyundai accent A slightly better set of instructions might help you. Mine is a 2003 Accent. You have to remove the access panel that covers the lamps and the wiper ...

need to replace the rear wheel bearing in the left rear 1995 three quarter ton g20 Replace them both at the same time. You'll need a shop press to get the old bearings off and to push the new ones ...

I have replaced the window regulator cable, pully and clip but need the gliders. Should be a 5 minute task at your nearest dealer. The clips will be genuine part only. Take your VIN number in with you

Question about Hyundai Accent

1 Answer

when you disconnect it. The replacement blade may have a clip on it which may need to be removed. Place the replacement blade in the same orientation as the one that was removed and clip back in place

Question about Hyundai Accent

2 Answers

...need to replace te metal in the rear bumper. How is the bumper attached within the frame? I cannot find any bolts that hold it in the frame. there is a trim panel on top of rear bumper if you look ...

Question about Hyundai Accent

1 Answer

...need to be replace? how? replace the axle seal to replace pull the rear cover draining the gear oil then rotate the carrier around till the small bolt holding the carrier pin remove bolt pull pin out ...

need to pull the wire clip above the bulb slightly to the side from its holding and it flips down and out of the way  Be careful not to detach the clip from its holding points

Not finding what you are looking for?
2002 Hyundai Accent Logo

1,443 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Hyundai Accent
2000 Hyundai Accent

1,131 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,082 Questions

1999 Hyundai Accent
1999 Hyundai Accent

517 Questions

2003 Hyundai Accent
2003 Hyundai Accent

500 Questions

1997 Hyundai Accent
1997 Hyundai Accent

255 Questions

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...