...Bank #1 passenger side Bank #2 driver side Replace the front (2) converter inlet O2 Sensors, when they get to 100,000 miles BANK 1 AND BANK 2 REFERS TO,YOU HAVE 4 OXYGEN SENSORS 2 PER CYLINDER BANK. ...
WHICH IS `BANK #1' ON lINCOLN ls 3.0 V-6?.........passenger or driver side? bank 1 is the bank that number 1 cylinder is located (any engine, not just Ford) passeger side
Question about Lincoln LS
Bank 1 Sensor 1" Just change the one in Bank 1, why change good sensors. "O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1" Probably just an air leak. NEVER use aftermarket or remanufactured spares,
...More questions, let me know. depends on what bank it is on 1 or 2 i beleave that bank one stands for the side no# 1 piston is on.then you should have 2 befoe an 2 AFTER THE CYLICSIT
...Bank 1 is the side of the engine where cylinder no. 1 is located. Bank 2 is, you guessed it, the other side. If you look up the firing order of the engine, you will see which cylinder is #1. Although ...
Which is bank 1 For Lincon ls v8 2002 Bank one is on the passenger side of the engine.
...of the car and what is the fireing order on the motor passenger side is bank one. the firing order is starting with the passenger side is 12345678 1-4 on the passenger side and 5-8 on the drivers ...
...Bank 1) This means that an oxygen sensor in bank 1 detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. Note: This ...
...Bank 1 and a lean code on Bank 2. I've replaced the MAF sensor and all 4 O2 sensors and it still says this? What is wrong? It is also idling a little loud. try changing the EGR vavle. i think the ...
...bank 1 will be the passenger side of your engine on the exhaust before the converter. Bank two is the driver-side of your engine. Upstream is the same. This o2 sensor has a heater in it and if the ...
423 questions posted
Usually answered in minutes!
1,383 Questions
1,094 Questions
898 Questions
605 Questions
442 Questions