...steering column. Remove the upper and lower plastic covers behind the steerong wheel (5 or 6 philips head) and see if you have any loose torx head or allen head screws. Ea rlier models had this isue. ...
Question about Mercury Villager
what could be causing excessive noise when using steering wheel? clock spring in steering column will cause noise in column.
...steering column when intermediate shaft is disconnected or DAMAGE TO CLOCKSPRING will result. Remove bolt retaining the lower steering column shaft to the steering gear input shaft. Disconnect the ...
...steering column shroud. Remove the steering column shroud screws. Disconnect the electrical connector. Disconnect the overdrive switch wiring clip. Remove the snap ring from the gearshift lever. ...
...steering column. Remove the 2 piece plastic cover behind the steering wheel. Look for the torx bolts and see if any are loose. go to this site and look at the phote for loose shifter ...
sliping falles out of gear wont go back up to reverse. the 2 screws on the steering column under the dash are loose. go here and see photo on loose shifter. http://groups.yahoo.com/group/villagerquest
lower steering column linkage replacement why do you want to replace it? They seldom have an issue, except shifter screws come loose. go here. http://groups.yahoo.com/group/villagerquest/ gerry
brake lights are stuck on brake switch on steering column has stuck or gone bad. replace the switch.
will not go in reverse go here http://groups.yahoo.com/group/villagerquest/ sounds like loose shifter bolts (2) on steering column shift tube. go here and read files and see pics.
...That the identical problem on my villager. The parts that operate the shift cable to the trans are broken, this will require pulling the steering column apart to inspect and replace what is ...
253 questions posted
Usually answered in minutes!
478 Questions
379 Questions
326 Questions
276 Questions
247 Questions