1993 Subaru Legacy "cause headlight tail lights work" Questions

...cause one brake light to stay on only when headlights are on I had a cop stop me and tell me one brake light was stuck on. But it only happens with the head lights or parking lights are on. Otherwise ...

tail lights do not. Will not make any noise when turning the key, except the buzzer telling you the key is in and display showing the door is open. Hazards work. Headlights do not. All fuses check out

...cause of my problem, I believe, is a bad or lose wire in my license plate light. I can not find the tail light fuse for a 2008 Honda Odyssey, tail lights for trailer ,tail lights will not work on ...

...headlight switch is malfunctioning, it could cause the headlights to turn on the brights when the vehicle is placed in gear. A problem with the dimmer switch: If the dimmer switch is not functioning ...

...tail lights work. But only one brake light works (drivers side). Why doesn't passenger side brake light work? Replace the right rear brake light bulb. It is possible that the filament has burnt out ...

...light relay be probable cause for that part of circuit? Headlight switch probably the problem. One circuit is shutting off when the other turns on. If it was a fuse or relay, it would just turn

...cause this to happen, fuses are good. left headlight, dash lights, and both tail lights do no illuminate. brake lights and high beams work fine. what would cause this to happen?fuses are good. Most ...

...as to what might be the cause? Check the tail light bulbs, check to make sure the dash lighting switch is turned up but not turned so far up that the interior lights come on when the door is

tail lights quit working. After research found probable cause in fuse box. Disassembled and attempted to repair. After I put back together I still had no parking or tail lights, plus now no headlights

...tail lights, however, the blinker and brake lights work fine ! Help ! The running lights and dash lights are on the same circuit.The brake lights and turn signals are on their own circuit.You need to ...