1996 Mercury Grand Marquis "wheel drive wont engage driver" Questions

...wheel. Remove the starter motor and check its pinion drive gear for integrity. Whilst the motor is off ease the flywheel round by using a large screw driver to lever it one tooth at a time. If all ...

...wheel drive , has push button four wheel drive lights change and can feel it shift to four wheel drive but doesnt engage front wheels.the front axel solenoid is good.so what could be the problem the ...

...wheel drive the driver side front wheel wont lock in,its like it wont stay engaged ,it makes a loud thump like it slips back out.. You need to pull that hub apart, you have some part in the hub lock ...

wont engage.instrument panel indicates 4wd is on. JACK ALL 4 WHEELES OFF THE GROUND START IT STAY IN THE DRIVER SEAT HAVE A FRIEND SEE WHAT WHEELS ARE TURNING THEN WITH FOOT ON THE BRAKE PEDAL PUT THE

wheel buttin wont light up, and the 4x4 wont engage i have a 4x4 that wont engage,the drive line just spins. the light on the dash buttin wont light up either, and i cant find the part under the truck

4 wheel drive wont engage in 2001 doge half ton pickup Check the vacuum lines at the front/bottom of the transfer case, drivers' side. they get oily and soft, then fall off or break.

...and vac motor for binging 1998 dodge 1500 4 wheel drive will not pull in any gear 2 w or 4 w drive line good put in any gear trys to pull but pop out took back drive shaft ingage transfer still no ...

...wheel drive wont disengage all the way. took hub off everything looks ok. heard that it could be a vacuum problem. did notice driver side hose came off. put it back on still makes noise. Could either ...

...wheel drive. Could be the new cable is different for your year model or were given wrong cable. Question is "Did you hold up new part to old and verify length?". Is 2 wheel drive cable different than ...

...drive forward while another is crouched near the front drivers side wheel (assuming thats the side the shaft comes to the front axle), in 2WD, the front drive shaft should not be spinning. have them ...