1997 Subaru Legacy "engine codes" Questions

...Engine Misfire codes for car? http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html Engine Misfire codes? ...

codes are cleared. The engine starts fine, idles fine and runs fine. After driving for ~ ten minutes, the engine light turns on, the same trouble codes go into memory, the engine is then hard to start

...codes (example P0XXX) need to be read that caused the check engine light to determine the root cause. If you do not have a OBDII error code reader then take it to an auto parts store ... they usually ...

...engine light code? You need to get the code(s) read using a code reader and then we can help. A place like AutoZone will read the code for free and then you can look it up at ...

...my car to work my speedometer stopped working and then when i was on my way home from work my engine light went on can any body help me out with this problem Could be a Bad VSS ( Vehicle Speed ...

Well, the engine management system has something wrong. Pull the codes and explore the code(s) given. Car running fine with the check engine indication is not unusual. Something is wrong, get after it

...Is Hi, I'm not sure if you're asking how to obtain the codes, or what the codes mean... I hope this link is of assistance to you. ...

...engine. Reading Codes 1985?94 vehicles Codes are displayed by the MIL flashing ON and OFF. The time duration of the flash identifies the significance of the digit. Three flash durations are used: A ...

your codes for free. You can buy a code reader if you wish but you will have to get the plug for a subaru also. They can be found on ebay. The code should be cleared once the engine check light is off

2005 subaru legacy has code p010, no probs with engine performance? Car has yellow engine light on and flashing green cruise light on dash - no effect on engine performance. Code P010 found (evidently