2001 Mercury Mountaineer "remove rear wiper motor" Questions

rear wiper quit working, no problems with any thing else on the vehicle. It doesn't make any sounds or anything, when I turn the button it just does nothing Check owners manual for fuse locations, you

...Remove the rear pivot arm. Remove the rear wiper motor shaft nut cover Remove the rear wiper motor shaft nut. Open the lift gate window. Remove the rear wiper motor cover trim panel. Disconnect the ...

...Remove the rear pivot arm. Lift the pivot arm to the upright position. Slide the locking tab out. Pull up and remove the pivot arm. Remove the rear wiper motor shaft nut cover. Remove the rear wiper ...

...Remove the rear wiper arm from the rear wiper motor output shaft. (Refer to 8 - ELECTRICAL / REAR WIPERS / WASHERS/REAR WIPER ARM - REMOVAL). - Using a small thin-bladed tool, gently pry at the notch ...

Remove the rear wiper arm from the rear wiper motor output shaft. Using a small thin-bladed tool, gently pry at the notch in the base of the rear wiper motor output shaft bezel to unsnap the nut cover

...Remove the rear wiper arm. Open the liftgate. Perform the following to remove the liftgate trim panel. If equipped, remove the lift motor link Remove the upper frame molding Remove assist handle ...

...simple, you have to open the rear door, remove the door panel and access the motor from the inside of the door. The rear wiper arm is usually held in place by a C-clip so be careful taking it

...remove the pannel cover on the rear hatch door I can get to the rear wipper motor Exploded view of the Explorer/Mountaineer rear liftgate trim panel (click for zoom) Rear Window Wiper Motor Fig. : ...

Remove the rear wiper arm from the rear wiper motor output shaft. From the outside of the liftgate, remove the rear wiper motor output shaft nut (Rear Wiper Module Remove/Install). Pull the rear wiper

...remove all the interior trim from the rear hatch first. Get a trim clip removal tool at a parts store...it will work much better than just a flat blade screwdriver. You'll have to remove the trim ...