low beams failed high beams work low beams failed bulbs good fuses good Replace the Relay.
...good, no power to drivers side bulb socket when high beams are selected. id just replace the bulb, socket,and your sure you checked all fuses Probably a ground issue,have you tried using a tester to ...
Question about Cars & Trucks
...bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter. Right hand low beam headlight bulb 9006 new. fuse good, blinker ...
Question about Cars & Trucks
bulb is dead. RH low beam works fine & all other lights fine. Low & High beam bulbs are separate bulbs. It does have AUTO light turn on feature that is working & have tried turning on manual, Still no
...terminal. You should see at least 12 volts when you turn on the high beams. If you do, it's the bulbs. If you don't it's likely the switch or the relay (assuming you've verified the fuses are
...changed the bulb and checked the fuse but still no low beam on passenger side running lights work as well as high beam 98 caviler high beam left side dosent work canged bulb checked fuse and all ...
...fuse for that circuit in the fusebox lower dash if this is ok check that your getting power to the high beam wire at bulb holder if not the part of switch for high beam isn't working if are getting ...
Question about Ford Cars & Trucks
//www.pirate4x4.com/forum/ford/871218-2004-expedition-headlights-only-one-works-fuse-fine-bulbs-good-wtf.html If lights go out on one side it is usually a bulb, but sometimes could be a wiring problem
...fuse has power on both sides ( with the low beams on ) next you can pull the headlamps, and check for power at the connectors, but depending when the last bulb change took place, I would say you need ...
91 questions posted
Usually answered in minutes!
495 Questions
353 Questions
227 Questions
191 Questions
166 Questions