2000 Volvo S40 "size socket replace brake pads" Questions

...size socket do i need to take of the brake caliper mounting bracket ,the bolts seem to be an unusual size are they a volvo special. thanks 7mm. I just replaced mine. And when you compress the piston ...

socket depending on wheel size Behind the calliper locate the two bolts, Not the bolts on the case around calliper , But on the calliper it'self then remove bolts and remove calliper replace pads, Put

...size of a socket I will need to remove the bolts that hold the caliper on, I`m told It may be a TORK or ALLEN socket and the size Is also In question, Your expert advise will be greatly appreciated. ...

...size and type of wrench do I need? 12 mm ,14,mm wrench or socket that to remove the caliper 17 mm wrench or socket for the bolt holding the brake pad braket Exactly my point as well make sure to ...

socket size to use for your brakes can be tricky, because sometimes it can be changed from how it originally was. I discovered that last month when I was trying to change out my brake pads for my 2005

...there should be two bolts make sure you have the right size sockets before you try to take off spray with some W-D-40 and on the socket if you have a 6-point thats best if they be on for a ...

...size socket is used to replace rear pads on 1999 vw passat Hi Brenton: May I suggest that you find a friend with a socket set, jack the car up, put it on stands so it is safe, and then you and your ...

size sockets and wrenches are needed to replace pads and rotors on a 2006 chevy cobalt get a standard metric wrench set at Sears combination wrenches and sockets as well you will need most of them for

...socket wrench with sockets from 1/4" to 1" in size 00:49 If you plan on doing brakes all of the time, you m ay want to add these things to your tool list: caliper spreader brake spring pliers brake ...

...size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove ...