1995 Volvo 850 "bent engine valves" Questions

...bent the valves and damaged the piston heads so you would have to go inside engine to replace those valves and heads.  if interferrence motor you need to change the timing belt every 50 to 60 ...

volvo850cranksnospark p lugs wet engine sounds like compression is flat Check your timing belt and if it is broken hope for no bent valves.

...engine wont start at all FIRST CHECK THE FUSE IT IS THE FIRST OR SECOND ONE IN THE FUSE BLOCK NEXT IS TO PUT A SHOT OF EITHER IN AIR BOX AND SEE IF IT KICKS AND NEXT IS TO CHECK THE IGNITION SYSTEM ...

bent the vavles , we finally managed to save up enough money to buy spares and replaced the big end bearings as well as the piston rings changed the valves and done whatever was supposed to be , but i

engine will not start. Any suggestion? I AM A ASE MASTER TECH ON VOLVO,S AND THE FIRST THING TO DO IS PEN AIR BOX AND SPRAY A SHOT OF STARTING FLUID INTI THE DOCT WITH THE SCREEN AND THEN TRY TO START

...engine. If you have bent valves, remove a plug wire one at a time and see if there is no change in the idle. My guess, one of them isn't going to change anything. That would be the cylinder that has ...

...bent valve or if I have to replace the engine? It depends on how much damage the valves did or didn't do to the pistons when they hit and bent. At the very least you're looking at a cylinder head ...

...bent valves, install new belt ,if your engine misfire or dont start at all ,there are bent valves, be sure to aling the timing marks ,perfect.. good luck Do not attempt to start the engine under any ...

bent valves 2006 nissan sentra se r? your engine would be running rough like a fouled spark plug, a super hot exaust system is caused by a vacuum leak witch will also make the engine run rough at idle

...your belt when bad on you , you could have bent valve, this engine is an interference engine, it will bent valve's do a compression test on cylinder's.in no compression an any cylinder's bent