headlights stopped working 1996 ford f150, all other lights work but the high beam light stays on replace the multfuntion switch on the steering column.
...replace steering column entire unit I have the whole steering column 96 3.8 ford windstar unbolt it at the steering coupling and remove covers off column disconnect wire harness unbolt column under ...
...steering column in a 1996 Ford Bronco? I need to replace the turn signal lever. I assume that the lever is the issue. The turn signals don't work, but the hazard lights work. The windshield wipers ...
...steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. ...
...steering column on a 1989 F250 4x4 7.3 diesel? I'm trying to replace the clutch and brake peddle support pivot bracket that is broken. I've gotten the bracket unbolted from steering column and fire ...
...steering column. If you mean the wheel has a lot of play left and right, you have worn steering components and should visit a garage asap. Things like the tie rod ends are worn, ball joints etc are ...
1996 ford thunderbird high beam switch does not activate high beams. Low beam works normal. you may need to replace the switch assembly inside the steering column
Question about Volvo DL
...steering column on my 1996 ford ranger, now the turn signals won't work. Can you help If you replaced the column as a complete unit from a salvage yard, and all of the wiring is connected, the ...
Question about Volvo DL
...steering column from the key lock to the ignition switch (generally mounted on the steering column. If the rod had been dislodged or the ignition switch had shifted position during your pervious ...
...steering column cover off and tap/hit the ignition barrel with suitable tool (small hammer)while twisting on key.It may be enough to loosen it so key comes out.You will have to remove steering column ...
44 questions posted
Usually answered in minutes!
