Question about Mercury Grand Marquis
1990 jeep commanche turn signal lights do not work, but the hazard lights do. I replaced the fuse, what else cani do? There is a seperate flasher for turn signals It should either be under the dash on
...1990 keep wrangler. The turn signal k arm on the steer wheel is missing. Is the windshield wiper control on the turn signal arm as well? I do not see a place to turn on the wipers just get one from a ...
1990 Jeep Cherokee Limited, I6 4.0L and I have problems with my right turn signal. This I know... 1) The bulbs are good. 2) Left flashers work front and rear. 3) I can manually make the right flashers
turn signals work, but no back up lights Neutral safety switch. Driver's side of the transmission, where the linkage goes in. You'll have to disconnect the cable, remove the two bolts, unplug it, and ...
turn signal lights? The turn signals work but the lights on the dash don't come on so I can't really be sure while driving. remove cluster, remove lamps replace with new done. ask any mechanic in town
1990 Jeep Cherokee intermittent electrical problem I have a 1990 Jeep Cherokee with an intermittent electrical problem. If I turn on the heater, the radio and turn signals stop working. Or.. if I use ...
...1990 Jeep Wranglers rear lights. The fuses and bulbs are all fine and my console lights up to show that the turn signal should be working but I am getting absolutely no lights for braking, turning or ...
1990 Jeep Cherokee - turn signals not working after replacing fuse. look for flasher,,,it is probably bad,,
1990 jeep turn signals don't work 1990 jeep turn signals don't work Dear, please look for the fuse for the side indicators. also look for the turning switch wirring and connections. look for the ...
593 questions posted
Usually answered in minutes!
661 Questions
611 Questions
534 Questions
488 Questions
496 Questions