2004 Acura RSX "dual manifold" Questions

Ad

...comes on and off. I got a PO661 posible problem but don't know what it means or could be. Intake dual runner manifold low voltage. please give me a good rating. i only need one more thanks!

Ad

...dual carb manifold setup with the number I have a dual carb/manifold setup, with the number 1463205 on the manifold, carbs are rochester 4 jet, what does it go to? I think chevy 350, but guessing You ...

Ad

...dual overhead 1.6 liter head bolt torque and sequence Whether working on a 1.6- or 1.8-liter engine, the torque specifications are the same. Intake and Exhaust Manifolds Tighten the intake manifold ...

...dual carbs 1 barrel, bad hesitation on acel from stop Rebuild the carburetor, You need to add heat to the manifold. See http://stoveboltengineco.com/index.php/tech-tips/ That will get rid of the

Question about Cars & Trucks

1 Answer

a V6 or V8 engine with dual exhausts, typically there will be 4 sensors - one on each exhaust pipe leading off each exhaust manifold and one on each exhaust pipe after each of the catalytic converters

Question about Acura RSX

2 Answers

...Manifold Runner Control (IMRC) is a system which uses dual intake runners to supply air to each cylinder. The secondary runners are normally closed, but the PCM opens them under high rpm conditions ...

...Manifold Runner Position Sensor/Switch Circuit (Bank 1) The IMRC system is monitored for failure during continuous or KOEO self-test. Each DTC distinguishes the corresponding failed bank for IMRC ...

...engine is accessible would be smart. This went on for a few years. Later 4.6 and 5.4 engines used dual overhead cams and the 1999 was a single cam engine. You should be aware also that because ...

Question about Acura RSX

2 Answers

...manifold before it goes into the catalytic converter. Kind of looks like a spark plug with a wire coming off of it screwed into the pipe. there should be 2,both are in the exhaust 1 behind the ...

I need the Torque Specs On my 1990 Acclaim Intake manifold torque specs .......... Single overhead Cam - 16 ft lbs. Dual Overhead Cam - 200 in lbs taken from Haynes Repair Manual. Good Luck.

Not finding what you are looking for?
2004 Acura RSX Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Acura RSX
2002 Acura RSX

136 Questions

2003 Acura RSX
2003 Acura RSX

104 Questions

2006 Acura RSX
2006 Acura RSX

30 Questions

2005 Acura RSX
2005 Acura RSX

28 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...