1995 Acura Integra Coupe "controls" Questions

how i fix control canister sistem for acura tl 1999 what is the "control canister system"? What is it suposed to control?

how to take off upper control arm on 96 integra Remove tire, remove lower ball joint, remove cv shaft, remove strut, then remove upper control arm. Ther is another way to do it but it can be ...

...check please thank u my email is [email protected] The rotary control switch on the dash controls the blower motor for the A/C. The A/C will not turn on unless the blower motor is ...

I am looking for instructions on how to remove the face plate of the air controls of my 1995 Integra, I need to see if the cable to the control has been disconnected. hook your fangers in the side of ...

...box as well. It's likely that the short you had before with your temp control caused the fuse that controls the rest of your lights to pop. It could be a simple fix with a small amount of electrical ...

...integra do It's another name for the ignition control module, costs about $50 at AutoZone.... A) Controls dwell or on time of ignition coils primary winding. B) When not replaced, vehicle could ...

...than the started? any suggestions? Ck the maf sensor. First sensor in duct leacving air cleaner. It controls fuel. chk the crank sensor above cranksgaft fron pulley It controls the spark and timong. ...

I have a 1996 Acura Integra. The blower moter will I have a 1996 Acura Integra. The blower motor will not work. I tested it like the manual explained, the blower motor is good. I replaced the ...

...I would follow the wiring from the fan to the engine. There should be a temperature switch that controls an electrical circuit based on engine metal and coolant temperature. It controls the ...

what does code 6 and 16 mean on90 integra Here is the code list for the 1990 OBD1 system on your Acura.Code 0 and 11 Electronic Control Module (ECM)Code1 Heated oxygen sensor ACode 2 Oxygen content ...