...down the rpms go up to 3000 when first start then thay go down to 2000 The throttle cable could be stuck, otherwise your idle sensor may have gone bad. I would suggest testing the sensor with a
...down trying to idle, and eventually will stall out after a minute of that. I can get it up to about 30 mph, but cant rev it without it dying. When i was driving it home I noticed it was overheating ...
...idle,just spray and listen for the RPM surge. The in-rush of carb clearer will increase the RPM on the motor. Record the problem spot(s) and address it later. === EGR carbon built up require 2+ hours ...
...idle change pitch, as though the car is having to work to generate the power needed. Could this be a short circuit? Here is some other information: I pulled the plugs from the rear taillight circuit ...
Question about Chevrolet Cars & Trucks
...down , set and idle for a while it starts idling up and down.any idea's? I have a 1990 S-15 with 4.3 motor idles high when you start, idles down , set and idle for a while it starts idling up and ...
...vacuum hoses, timing all seems ok. when adjusting tps it will idle too hi and stop going up and down, turning the idle screw don't change anything. can be the automatic idle check that its ...
Question about Honda Cars & Trucks
down idle on my 94 civic ex? ' Yahoo ... https://answers.yahoo.com/question/index?qid... Oct 27, 2011 - Okay so im learning lots about Honda's, i have rebuilt motors and put them but i cant ... It has
...sensor. If it's a low up and down idle and runs rough it is mass air flow meter. If you unplug the mass airflow meter and it will just low idle (no up & down) then the mass air flow meter is
...the idle keeps going up and down and up and down. Bad O2 Sensor? Thanks. usually idle that goes up and down is cause by a bad "idle control valve" located near the throttle body. Needs to be
Question about Cars & Trucks
...make but will start up right away Shifting down to stop it will idle way down an stall out indicates a vacuum leak or idle speed sensor problem may fix by increasing the idle rpm to around 800-950 ...
23 questions posted
Usually answered in minutes!
20 Questions
7 Questions
6 Questions
2 Questions
2 Questions