...gs 300 inside the gas tank. remove the gas tank and its right on top. remove all 3 screws and turn and pull out. In the Trunk .To access the Fuel Pump just remove the Upper Back seat and Fire Wall
...the gas tank, and would be a 3 hour job? Is this about right? The fuel pump is located in the fuel tank and it can be reached by removing the back seat. It should be between 1hour and 2hours.
Question about Lexus GS 300
...remove the electrical sensors attached on back of flow from side closest to the carburator other on the tube leave on there. manually open the caburator with finger and spray cleaner inside the ...
...back. Grab a flash light and a long bladed flathead screwdriver. In the center of the lid inside is the latch it has a slot into which the screwdriver will fit. turn itcounterclockwise, and the lid ...
seat the caliper pistons, as the new pads will be much thicker than the old, and need the piston to be pushed in all the way. Make sure you siphon off some brake fluid at the master cyl. before you do
...remove front seat if it will not go back Check the track from which the seat movers forward/ backward.Many a times something gets stuck up/ blocked in the track causing the problem. On these case go ...
back-of-seats.html --------- How to remove Seat? http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-seat-on-acura-integra.html ----------- These will help. Thanks. take it out and remove power
...remove motor replace inside carbon,,.chiepest way not to spend to much money.. i suggest even once a month,lubricate all power seat/even not powerseat/,door hinges/.trunk door/.power antenna./ .by ...
...back. Remove the partition cover. Remove the mounting bolts and remove the fuel pump set plate. Remove the three nuts and disconnect the fuel pump bracket from the tank. Disconnect the fuel hose from ...
167 questions posted
Usually answered in minutes!
222 Questions
91 Questions
37 Questions
20 Questions
6 Questions