1998 Lexus Gs 300 "replace crank shaft 1999 jeep" Questions

Ad

Question about Lexus GS 300

1 Answer

replace the crank shaft sensor, plugs, and i get spark. When I turn the key, the starter will come on, but it will not turn over. I took it to a mechanic, who was the one that replaced the crank shaft

Ad

... automatic 2 wheel drive. Will start back up.Cam shaft sensor, crank shaft sensor, fuel pump have been replaced. did you change the fuel filter, very common problem that gets over looked too many ...

Ad

Question about Lexus GS 300

3 Answers

...Crank shaft senor. It would just turn off even on the highway at 60mph. If you can change it yourself you will save a lot of money. same thing happened with my 99.Took it to Auto Zone the codes came ...

...we have replaced the cam and crank shaft sensors and ran fine then went to store came out and started it and it ran rough again You need to check the fuel pressure, if not enough it will run

Question about Lexus GS 300

1 Answer

...REPLACED COIL CHECKED WIRING IS THERE ANYTHING YOU CAN TELL ME TO HELP did you instal the crank shaft position sensor which is mounted on the bell housing after you put the transmission

Question about Lexus GS 300

1 Answer

replace fuel pump, crank shaft sensor and spark plugs. When you drive it wont shift now. The gas light is on and tank is full. Could you please help with any information on this problem? Thanks did it

Question about Lexus GS 300

1 Answer

...Attempts to re-program the computer have failed to solve the problem. Please send us your best advice to trouble shoot the problem. Thank you, Ivy Miller Check out the crank shaft sensor for the ...

crank shaft in a 99 gck 4.0L just want to know what parts will i need other than crank, rear seal timing gasket do you have a factoy manual? u will need to use the exact correct sealers on the gaskets

Question about Lexus GS 300

1 Answer

...have to turn the key to off and then back on before it will start again Check the crank shaft positioning sensor. Had same problem with a 94 model. Also in a jeep. Replacing it should fix the

how do you replace it? Gi it is near the crank shaft at the bottom of the engine. You will most likely need to take it a shop - because it can ruin your car if you mess it up and cost a lot more later

Not finding what you are looking for?
Cars & Trucks Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...