1998 Acura TL "replace rear brake pads" Questions

Ad

...replace rear brake pads? And check condition or rotors? The piston brake pad assembly is usually held in place by two bolts that face the car. Remove these and tap the assembly off .Hang the assembly ...

Ad

Do you know what type of brake fluid is used on a 2006 Acura 3.2 TL? Need to replace rear brake pads and rotors and need to make sure the correct brake fluid is used. Thanks! dot 3 brake fluid

Ad

Question about Acura TL

2 Answers

...replace brake pads on 1 side of the vehicle at a time. Failure to use this procedure could cause the caliper pistons on the opposite side of the vehicle to pop out requiring the reconditioning or ...

...replace them. but I have a horrible grinding sound when I apply the brakes on the rear right wheel did the pads have a shiny glaze? If so, use sand paper or emery cloth to remove the glaze. Maybe you ...

...rear . Check with your local parts store they can tell you which is which . also if you are replacing the pads i would make sure the parts you replace them with meet OEM standards . By using good ...

replace the front rotors once. Does anyone have any photos of the stages of rear brake pad replacement? An inspection at the dealer resulted in their suggesting replacement of both the rear brake pads

...rear brake components TMMK made rear brake components To Remove: Drain the brake fluid to ½ full level in reservoir. Remove the rear wheels. Remove the caliper slide pins. Remove the caliper ...

Question about Acura TL

1 Answer

replace rear brake pads procedure to replace rear brake pads on 1995 saab 900s Rear disc brake pads offer better performance and are not as affected by moisture like conventional brake shoe style ...

...is a very common problem with GM vehicles that have raer disc brakes it is called rotor delamination replace rear rotors and pads and check calipers are sliding correctly. And?????????????????????

Question about Acura TL

1 Answer

...REAR BRAKE PADS.TO REMOVE REAR PADS ONCE YOU COMPRESS PISTON BACK IN THE CYLINDER BORE. YOU CAN TO REMOVE REAR BRAKE PADS BY REMOVING RETAINING PINS IF EQUIPPED OR BRAKE PADS HELD IN PLACE BY ...

Not finding what you are looking for?
1998 Acura TL Logo

272 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

424 Questions

1999 Acura TL
1999 Acura TL

415 Questions

2004 Acura TL
2004 Acura TL

357 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

278 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...