1995 Plymouth Neon "feul pump relay" Questions

feul pump relays what do they look like You didn't state which engine you have, but for a baseline 4 cylinder 1996cc motor, it'll look like either this: ...

...at the pump with the switch on.If you do the replace the pump.If you do not check voltage at the relay in fuse block and also the feul pump fuse.Let me know if I can help.There is no pressure

...feul pipe from the tank to the carb sounds like a fuel restriction, change fuel filter and fuel pump relay.scan it map sensor and egr valve make it run rough.also check pvc valve could be stuck

...feul pump and feul filter. When you turn the ignition to the on position you do not hear the feul pump engage and there is no feul pressure at the filter. I checked the feul pump fuse it is good was ...

...feul pump relay located on 1992 s10? starter wire rubbed aginst engine block and feul pump wont get power to grey wire that runs feul pump .Where is the fusible link that if bad will keep feul pump ...

...not getting any electricity coming to the feul pump.all feul pump is ok. Check this 3 items in this order efi fuse, efi, relay, circuit open relay.all of them in the engine compartment's fuse

...feul pump and have very little feull comeing out the rail i replaced the relay due to not hearing the hum sound and replaced the feul filter and the fuse for the feul pump and nothing helped i know ...

feul pump fuse, I have checked the feul pump relay and it opens/closes but no power in the fuse block under the dash for feul pump, checked the wiring behind the fuse its all connected. Any ideas what

Feul pump stopped working. I changed the relay, it workred for a few hours then stopped again. I changed the feul pump, again it didn't work. Before, I was able to hear the feul pump now there is ...

feul pump won't run (new feul relay and feul pump) My 88 ramvan did the same thing and it was the pickup sensor in the distributor. I replaced it and everything was fine. If the sensor is bad it won't