1992 Plymouth Grand Voyager "air" Questions

a/c is not blowing out cold air only hot air, when i turn off air condition, a burning scent starts coming through the vent. please tell me what should i do in order to start receiving cold air from m

...Plymouth Grand Voyager with 3.3 liter engine. I remove two 10 mm bolts holding what is labeled an air filter housing, but can seem to open the housing box unit then to access the air filer and ...

how do you change air filter on 99 ply voy. 3.0 engine The filter is located down low under the air box which connects to the throttle body. You'll need to remove the fresh air inlet line from the ...

I have a 1997 plymouth grand voyager. When I turn on my air conditioner, I do not receive any cold air only hot air.I used to receive cold out a couple of months ago but even then it would only blow c

how do you get to the air filter so you can change it? Air filter is located under the black plastic on the left front under the hood. First remove the two 10 mm head bolts holding the air box. Next ...

Is there a cabin air filter? I get a musky/mildewy odor when I first turn on the air conditioner. I live in So. CA, so humidity is low; I usually run the air con. with the vent open to outside air. ...

A/C is not blowing cold air My a/c is not blowing cold air, it blows only hot air. I added freon and had it check there is no leaks. Can you tell me why the a/c for 97Plymouth Voyager is only blowing ...

how much coolant should go in my air conditioner? I have a newly used motor with the air conditioner attached. How much coolant should it take? DEPENDS TO THE AIR CON NEEDS TO COOL DOWN. AS EVERYTHING

Air filter - How do I get the housing open for the air filter in order to change it? Hi, came across your post on 10-26. U need to loosen hose clamps, remove air cleaner housing bolts, then lift out ...

...fix or suggestion??? thank you Backfiring can occur in engines that are running lean because the air-fuel mixture has insufficient fuel (too much air in the ratio) OR whenever the timing is too ...