Question about Mercury Cougar
...brake light switch . this is a safety feature so that you are on the brakes before being able to shift, this avoids the car from taking off. the problem has to be in the brake switch area. This car ...
Question about Mercury Cougar
...brake light switch, connector.car will not start from neutral. Still no brake lights would indicate a bad wire. Check for power at the brake switch, repair the wire, they usually break close to the ...
...brake light switch. The switch is located above the pedal under the dash. Follow the pedal up and you will see it. Make sure current goes thru the switch. If it doesn't the switch is bad, if it does ...
...light an 3rd brake dont work cougar 2002 Burnt bulbs, bad wiring. For the dome, it could be a bad dimmer switch. Omar, check replace bulbs, check for power at sockets with a DVOM, if no power check ...
Question about Mercury Cougar
...brake switch , which powers your brake lights . Electrical Troubleshooting Basics EricTheCarGuy If you have not had any experience in electric trouble testing you may want to take to someone who is
...brake lamp switch on the pedal, and the car would not shift gears. When I put the brake lamp switch back, the car WOULD go in to gears. Does that mean my switch is okay? Or could it still be the ...
Question about Geo Cars & Trucks
...brake light switch behind the pedal? 94 geo tracker 4 wires into it, i have one with power and one ground. 2 other wires are dead. Brake light bulbs are illuminated within the rear combination light ...
...brake light on one side, and a blinking light on the turning side. The rear turn signal lights and brake lights share the same filament in the bulbs (and the same wire). The wire on the turning side ...
...brake light switch I have a problem with my brake lights in my 2007 E-150 van. I replaced the pedal switch after checking the light bulbs, everything works: turn signals, hazard lights, tail lights ...
Question about Mercury Cougar
brake light switch to turnsignal switch, to lights. Did you take a test light and test to see where you were getting power and not getting power. This is your first step. Sometimes people put to large
359 questions posted
Usually answered in minutes!
1,305 Questions
630 Questions
345 Questions
361 Questions
333 Questions