timing marks in proper place .How do i realign without severe engine damage occurring from improper timing and timing belt installation? mcdevito75 here, You"ll have to manually turn the camshaft gear
timing marks on them that align with marks on heads also the new belt will have marks on also ,which also lineup with marks on the pulleys, if needed this is a good time to replace the camshaft seals
Question about Subaru Impreza
need diagram of cam marks and crankshasft marks for timing belt set up timing marks for cams and crank they are on the t/belt cover.
...mark driver side at 3 o'clock and passenger side at 9 o'clock. Do not use arrow on can wheel as timing
...timing marks timing marks are guides for when you put in your timing belts to ensure that at top dead center of the piston it should not hit the valves as well as serve as a guide in setting your ...
timing marks are spot on (left and right cam aligns with the cover, crank mark aligns with the mark on the sensor.what is the problem Check your thermostat and if it turbo I advice to remove and clean
timing marks wrong the on the single overhead cam(1st picture) you won't hurt the engine, you'll just have to re-time it. But, if you DO get the timing marks wrong on the duel over head cam engine(2nd
...information or questions. Feel Free to contact me at FixYa.com! ...
...l DOHC emgine and I replaced the timing belt lining up all the marks on the belt and pullies and when I turn the engine over it jumps the marks. What could be wrong? you didn't tension the belt ...
...on the tup of the oil pump directly below the crank sensor, the two cam ullys each have a hash mark on the outer edges and the both align strait up and down with the marks on the rear timing
173 questions posted
Usually answered in minutes!
276 Questions
182 Questions
128 Questions
134 Questions
125 Questions