1999 Jeep Wrangler "turn signal light stays 04" Questions

Ad

Question about Jeep Wrangler

2 Answers

...turn signal lever but when I release the pressure they come back on. I also pulled the fog light relay to shut off the lights. Unfortunately, I believe the only solution is to replace the turn signal ...

Ad

...turn signal lights stay on once activated by either turn switch, hazard light switch, or alarm. Can sometimes get them to go out by using right turn switch position, or playing with hazard light ...

Ad

Question about Jeep Wrangler

1 Answer

...turn signal on then they go out completely, till you return the turn signal to off. I don't even know where to start. I did check all the fuses and the checked out. Thanks for listening, Jim PS the ...

Question about Jeep Wrangler

1 Answer

Turn signal lights not working The turn signals in my car go out periodically. The hazards have also not worked, but when the hazard button is pressed hard for a second or two, they start. They ...

...turn signal lights, back up lights all work. The clock even stays lit, but the other dashboard lights don't work all the time. I checked the fuses in the box I found under the glove box on the ...

Question about Jeep Wrangler

2 Answers

...turn signal switch and the running lights stopped working along with the dashlights. and when you turn the headlights on maually the park fuse blows but the headlights stay on. ive replaced the drl ...

Question about Jeep Wrangler

1 Answer

...turn signal turns on. on the right side i have no running lights or brake lights but the blinker works just fine and no lights on for the 3 brake light up top. ive replaced bulbs and fuses but the ...

...turn off. Almost got hit too!! So i pulled over and it was shaking and the rpms were going up and down when i put it in park. I turned ut off and looked under the hood to make sure everything was ok. ...

...turn off. Almost got hit too!! So i pulled over and it was shaking and the rpms were going up and down when i put it in park. I turned ut off and looked under the hood to make sure everything was ok. ...

...Turn ON the ignition with the engine OFF. Close the rear compartment. With a scan tool observe the trunk ajar switch signal input in the BCM data list. Does the scan tool indicate the trunk ajar ...

Not finding what you are looking for?
1999 Jeep Wrangler Logo

641 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...