1999 Jeep Wrangler "clutch noise disengaging" Questions

Ad

...noise. There is something wrong with the clutch. Make sure that there is enough clutch fluid in it. For some reason the clutch isn't disengaging like it should, so you are grinding the gears in ...

Ad

...noise if this were the cause. Or your clutch hydraulics have gone out. check your fluid level. if low you may have sucked some air into your system. you will have to bleed the lines as you would for ...

Ad

...noise when transmission was in reverse. sounds like the clutch is not disengaging to me. is it hydraulic?? needs fluid maybe?? has a leak?? Sounds like your synchronizors are shot. Try double pumping ...

Question about Jeep Wrangler

2 Answers

noise in clutch when in neautral What you're hearing is a "dry" throw out bearing. They're internally lubricated from factory and after a while they will dry out (especially if you off road and ...

Question about Jeep Wrangler

1 Answer

...noise when clutch is (up) engaged in neutral. When in neutral Noise goes away when clutch is (down) disengaged. Noise gets faster with faster RPMs when clutch is disengaged in neutral. What's my ...

Question about Jeep Wrangler

1 Answer

...clutch. If it is a more rubbery sound for example a car spinning its tires kind of noise it could be a loose belt. 1. Check to make sure all belts are tight under hood 2. start car and look at ac ...

Question about Jeep Wrangler

1 Answer

...noise My clutch makes a clicking noise when I engage/disengage the clutch. The funny thing is there is no noise in the morning when the engine is cold. The clicking sound only gets worst as the ...

Question about Nissan Cars & Trucks

1 Answer

...clutch/trans noise i hear a whirling slapping sound from tranny area while in lower gears but is gone when clutch is engaged. maybe pressure plate or flywheel? Sounds like the release bearing , with ...

...noise is because the clutch plate is not fully disengaging and the input shaft is still driving. If you did not use the same length of push rod then the slave cylinder is not moving enough to ...

noise. I got the clutch fixed but even after that its not taking 5th gear and its still making the grinding noise. What does this mean? If the clutch is bad it would make the same noise in every gear,

Not finding what you are looking for?
1999 Jeep Wrangler Logo

641 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...