on my 1998 subaru outback 4wd i have 2 codes that came on p-1540 and p-0500 what do they mean.- . P1540 VSS(vehicle speed sensor) signal to high, P0500 vehicle speed sensor malfunction.
What is code1540 VSS Signal Malfunction (is speedometer working)
. what part to I buy and where is the sensor located? There are actually two Vehicle Speed Sensors (VSS). I'm going to assume you have a 2.5 liter engine and an automatic transmission. The Vehicle
In the process of installing a VSS in a 1997 Legacy Outback, manual transmission. Easy enough to get out, but it is hard to see, it appears that there is a slot where the sensor needs to be fitted. Is
...cruise control above 70mph? as it an automatic and one of the sensor for the cruise control is the VSS then I would be suspecting that there is a problem in the overdrive of the transmission -could ...
...tridometer aswell If the odometer and tripmeter stop incrementing their mile values, then the VSS or vehicle speed sensor is bad or has become disconnected. Vehicle Speed Sensor OPERATION The ...
...Park the vehicle on level ground and apply the parking brake.Disconnect the vehicle speed sensor (VSS) electrical connector.Remove the bolt and the VSS.Place a funnel into the VSS hole.Add the ...
1998 mercury sable.need to change vss,does this have to be done from underneath vehicle'am a little afraid of breaking exhaust bolts Vehicle Speed Sensor (VSS)Removal Raise and suitably support ...
...4x4 and is there any sensor on ****** that would be involved or cables? The vehicle speed sensor(VSS)is located on left rear of transfer case on 4x4( 4wd) 1993 jimmy.Ensure ignition is off.Raise ...
where is the speed sensor This is what it looks like: VSS with connector and driven gear Here's the steps on getting to it and replacing it: Removal & InstallationDisconnect the negative battery ...
316 questions posted
Usually answered in minutes!
315 Questions
235 Questions
240 Questions
176 Questions
139 Questions