2000 Mercury Mountaineer "bleeding abs brakes without scan" Questions

Ad

Question about Mercury Mountaineer

1 Answer

...BLEEDING THE SYSTEM. THE DEALERSHIP OR GARAGE WILL HAVE TO PRESSURE BLEED AND USE TECH 1 SCAN TOOL.IF YOU HAD THE OLD SCHOOL NON ABS BRAKE SYSTEM YOU CAN MANUAL BLEED BRAKE SYSTEM WITH NO

Ad

...Bleeding the ABS System Print This procedure should be followed to ensure adequate bleeding of air and filling of the ABS unit, brake lines and master cylinder with brake fluid. Remove the reservoir ...

Ad

...Hope this helps and please send people to my auto-repair-website to check out my satisfied customers at: http://www.bigasautorepair.com/ Certain ABS systems require a scan tool to bleed the

Question about Mercury Mountaineer

1 Answer

...ABS bleeding procedure: WITHOUT TECH 1® OR T-100® Do not place your foot on the brake pedal through this entire procedure unless specifically instructed to do so. This method can only be ...

brakes fail again.They all say the car is not leaking brake fluid. If I get them bled without any other fix, they last 3 days only. Fixed--- I don't think so !!3 Mechanics-that is sadHow about the

...bleeding would fix. It could also be a malfuntioning control modual, which can be rebuilt for under $200 if you look on-line for modulemaster. The ESP(electronicStablityProgram) is tied into the ...

Question about Mercury Mountaineer

2 Answers

abs faults, checked entire system for leaks/damage/abnormalities. everything i have checked has been ok. seems like proportioning valve but didnt have any issues when bleeding as i thought i would. It

Question about Mercury Mountaineer

3 Answers

...brakes, it can't hurt. If this doesn't get it working, you may want to scan the ABS system with the correct scan tool. It could need a module rebuild, but I doubt it. Good Luck! The new wheel bearing ...

Question about Mercury Mountaineer

1 Answer

...ABS modulators have special bleed screws to help you vent the trapped air when bleeding the system. Others do not and require the use of a scan tool to cycle the ABS solenoids while you bleed the ...

Question about Mercury Mountaineer

2 Answers

...abs light is on. It came on before but I rebleed my brakes but it still stays on. My brakes are stops better than before so what can be the problem? abs sensor or just code stored in computer have ...

Not finding what you are looking for?
2000 Mercury Mountaineer Logo

445 questions posted

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...