1987 Jeep Cherokee "trailer light fuse" Questions

...for continuity and that is good-but no voltage... Hi. The trailer has a shot in the wiring and blew your Jeep lights. Check for fuse in fuse box near battery or inside Jeep under dash and replace

...Any ideas. Did you use a wiring adapter? this plugs into the stock system to properly power the trailer lights. the other thing is you could have a short to ground in the trailer wiring, ...

trailer hitch lighting. There is usually a in-line fuse that has blown and causing most troubles. If that is fine then check the fuses in fuse box. If that is fine then go ahead and check ground wires

Cant get running lights to work on trailer I installed a four wire flat pigtail on my Jeep Cherokee. The turn signals and hazards work, but the brake and running lights do not you need a ground wire ...

...trailer wire box attached to rear drivers side-wife left it hanging out and ran over it. Now I have no rear driver tail light or front amber running light. All turn signals and running lights work ...

no park or inside panel lights how do I fix this , because I keep changing fuses you have a short somewhere in the wiring.if you have trailer wiring look there first.

...light dimmer 87.5 AmpGauges, Instrument cluster, Seat belt warning, Headlight delay, Chime module, Overhead console 95 AmpInstrument panel illumination 1025 AmpRear window defogger 1130 Amp Circuit ...

light and instrument panel lights are working. I've checked all of the fuses in the panel under the drivers side and they are good. I've looked and looked under the hood and can't find the engine fuse

light (I like the new led) should reveal broken insulation or cut. It may have been an accident repair area. ouch a French RENIX, car, 88. had 2 i did, for 500k miles. (a love hate thing, love jeeps ,

...on, fronts lights work. also back lights work for stopping and turn signals just not when you turn night lights on check the fuse for tail lights, should be 10 amp unless you have a trailer ...