2004 Isuzu Ascender "rear door lock" Questions

Ad

rear colision could cause that but your speed sensor is bad. the speedometer was off and most of the time not working at all, i had the dealer look at it (under warranty at the time) and they replaced

Ad

rear door lock switch ?€¢ RH rear door lock switch ?€¢ LH middle door lock switch (w/ V4U) ?€¢ RH middle door lock switch (w/ V4U) ?€¢ Driver door switch assembly (DDSA) ?€¢ Driver door module (DDM) ?

Ad

rear door lock relay • The rear door unlock relay • The door lock actuators in each of the doors . The rear passenger doors are controlled by the BCM through the rear door lock and unlock relays which

...Rear Door(s)) 2 Activate the door lock switches to the lock and unlock positions. Do both rear passenger doors lock and unlock? YES - Go to Testing for Intermittent Conditions and Poor Connections in ...

...rear door lock actuators). • LGM (liftgate door lock actuator). The DDM, PDM and LGM are directly connected to the respective door lock actuator through the door lock motor lock and unlock circuits. ...

Question about Isuzu Ascender

1 Answer

rear door lock will not lock or unlock how to repair rear door lock passenger side rear door will not unlock when car is put in park. It will unlock manually. Car is a 2001 Buick La Sabre Custom. ...

Question about Isuzu Ascender

1 Answer

...rear door actuator on a 2002 expedition please rate as solved if this is what you need. You will need to borrow a heavy duty riveter from autozone or wherever you buy the lock cylinder from. Removal ...

...lock the rear doors is manually. Both rear doors will un-lock with key bob, door switches, and as programmed on steering wheel. both rear door lock actuators need replaced I have done hundreds of ...

...rear door lock or unlock relays and also send a LAN message to the DDM and PDM to perform the commanded function. The modules that activate the power door lock motors are: • DDM (driver door lock ...

rear door lock / power locks Rear door / hatch will not unlock with the key or with the electronic system. Inserting key in rear will cause all loks to engage and disengage. When stilling, not running

Not finding what you are looking for?
2004 Isuzu Ascender Logo

252 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...