1989 Isuzu Trooper "slacken bolt" Questions

Ad

...not start it is not the alternator or battery and i just replaced the fuel pump what could be wrong Slacken injector pipes and check your getting fuel.The fuel tank is a fault with the trooper, The ...

Ad

Slacken tensioner pulley bolt [9]. Push tensioner pulley against belt. 5. Ensure belt is taut between injection pump sprocket and tensioner pulley as well as crankshaft sprocket and camshaft sprocket.

Ad

Question about Isuzu Trooper

1 Answer

...bolt 5. slacken tensioner bolt 6. Allow tensioner to operate. Tighten tensioner bolt 6. Tighten tensioner bolt 5. Turn crankshaft on turn clockwise. Ensure crankshaft sprocket timing marks aligned 4. ...

Question about Isuzu Trooper

1 Answer

...adjusters once you have done that you will be able to remove belt same applies for slackening alt belt make sure you slacken of locking bolt otherwise you will bend adjuster bolt.hope this helps

Question about Isuzu Trooper

1 Answer

...slacken compressor or power steering pump,, 5.) push forward,, remove that belt (TAKE NOTE WHERE IT GOES) 6.) replace bolt belts and tighten back slackened components,,, use a bar to pry the ...

Question about Isuzu Trooper

1 Answer

...then find the tensioner bolt and slacken it off and then push pump unit back..Same sort of thing with the A/C pump but i think but cant remember but i sure this one has an idler/tensioner to

Question about Isuzu Trooper

1 Answer

...way? When loosened there is no give in the belt. slacken fixing bolts then look for the adjuster its like a long threaded bolt,but you must slacken the retaining bolts on the pump or it wont ...

bolt seems to be stripped. What can I do to manually tighten it? you tried to move the adjuster but didnt slacken the supporting bolts first ,sorry you will just have to renew it ,ir slacken the bolts

...stages, applying the following procedure successively to bolts 1-2 then 3-4, 5-6, 7-8 and 9-10. - Slacken bolts 1-2 until they are completely free. - Tighten bolts 1-2 to 2 daN.m, then angle

...CYLINDERHEAD BOLTS tighten main large cyl head bolts like this. stage 1. 29nm stage 2 .59nm stage 3.slacken off. stage 4. 29nm. then stage 5 50 t0 55 degrees start in the centre of the head and work ...

Not finding what you are looking for?
Cars & Trucks Logo

183 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...