1992 Plymouth Voyager "valve" Questions

My 99 Voyager won't crank. The intake valve is blowing out air instead of in. I was told that it was a bent valve, but I was also told it could be just the valves. Any advice?? SOUND LIKE WORN OUT ...

WHY DO ROCKERS KEEP BUSTING 3.3 MOTOR WEVE REPLACED TWICE there is not enough spring travel on the valves The rockers used are incorrect for the cam used and the lift of the cam is making the rocker ...

exhaust valve stem hight above head? after seats were ground, an auto repair shop said one valve is staying open due to the stem length since the the valves are now recessed. Ask them grind some off ...

pvc valve need to find location of pvc valve on 1995 3.0 engine it is small and threads into the lower intake near the front valve cover. if your looking at the front valve cover from in front of the ...

replacing valve cover gaskets on a 1998 plymouth voyager oil is leaking around the valve covers. I need the instructions and the torque setting for the valve cover bolts How to Replace the Valve Cover

...on a plymouth voyager it snaped today how hard is it to replace and what are the chances that my valves are bentit is a 2.4 dohc 16 valve 4 cyl. Valve are definetly bent.Its a bit easyer to change ...

nocompressionvalve#6 blows compression thur valve#6 will not idle not sure what you are asking, you found the problem ....the valve is not seated properly in its seat or the edge of the valve is ...

...plug i`m guessing you have a 3.0litre motor and are talking about the ones on the head wear the valve covers sit on.these you get when you buy valve cover gaskets for the car.they come with them ...

How do I change 2003 Chrysler PVC valve? Hi just figured out that the PCV Valve on the 2003 Chrysler Voyager is located on the top back side of the engine. If you have already purchased the PCV valve ...

...to get the main block aligned. With the head removed you can turn the cam shaft till the number 1 valves are both closed and the number 3 exhaust valve is open. Take the time to inspect the valves ...