2001 Isuzu Rodeo "auto transmission band adjustment" Questions

auto shifting. via PCM, did you scan the PCM yet? why not post symptoms first or put us on same page,a win/win as promised the book http://www.transmissionpartsusa.com/4L30E_Transmission_Repair_Manual

...rodeo I come to a complete stop n take off n it feels like I get hit from behind. What would b the problem Sounds like auto transmission 'slipping'. Take car to dealer or trans shop for band ...

...auto transmission specialist( only-no local mechanic ), have them do a proper diagnosis and quote and ask will a fluid change and adjustment when the pan is off fix the problem if could be a band ...

...band adjustment or not on 09 matrix for 4th gear automatic transmissions have both band and clutch adjustments take it to an accredited auto transmission special shop for the inspection and ...

...auto transmission. hello, recently my 1998 subaru legacy limited GT 2.5l has not been shifting correctly, it is an automatic transmission. when i drive it it revs real high in 1st gear and then skips ...

...auto parts and follow the procedure for that. Its a simple and cheap fix. You pull the pan and remove the valve body, grab your torque wrench and tighten the bands to specs. Might just save you a ...

...auto Transmission Bands are adjusted when you rebuild a trans They do not wear enough to need adjustment Two things happen If you turn the screw the wrong way, parts fall inside the trans & you ...

...auto transmission **** until it reaches about 80kmph? the steptronic auto transmission jerks (grabs) until it reaches about 80kmph run the fault codes to check for problem servos and solenoids . ...

auto transmission. It is slow to shift into reverse. How can I adjust the bands? I have a 1991 Geo Tracker truck I use to plow small snow fall whenever I shift from drive (forward) to reverse it takes

...transmission adjustment I'm considering buying a 1985 Holden (Isuzu) RB Gemini. I've been told the auto needs the bands adjusted. It apparently changes gears at the wrong speed.....? (sorry, that's ...