2004 Jeep Wrangler "remove torque converter bolts" Questions

Ad

Question about Jeep Wrangler

1 Answer

...remove the piece of wood. Install the flywheel and torque converter access cover. Install starter motor. Connect the exhaust pipe to the hanger and to exhaust manifold. Install the transmission oil ...

Ad

...A LITTLE AT A TIME TO REMOVE EACH OF THE BOLTS THAT HOLD IT TO THE TORQUE CONVERTER. BE CAREFUL. HOPE THIS HELPS. PLEASE KEEP ME INFORMED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD ...

Ad

...Remove or disconnect the following: Torque converter access plug 4L60E/4L65E removal Flywheel to torque converter bolts The two bolts securing the transmission rear mount to the transmission The ...

...remove the torque converter. On reassembly you have to make sure that the torque converter slides onto - and seats properly - on the transmission input shaft. If you have the equipment - and a bit of ...

...Remove the torque converter access cover. If the transmission is being removed for rebuilding, remove the oil pan and drain the fluid. Reinstall the pan before removing the unit to protect internal ...

Question about Jeep Wrangler

2 Answers

...remove it with the torque converter still attached to the engine, no cover plate to acess bolts. If I can how do line it back up for installation remove the starter and get the bolts through there. ...

and unbolt the two out of the car. PROBABLY GOING HAVE TO REMOVE ENGINE AND TRANSMISSION TOGETHER THEN REMOVE TRANSMISSION FROM ENGINE LEAVING TORQUE CONVERTER BOLTED TO FLYWHEEL.THATS THE ONLY OPTION

Question about Jeep Wrangler

1 Answer

...remove the flywheel from the torque converter on a 2001 Tiburon? Torque converters are bolted up to the flywheel or flexplate. Probably 4 or 6 bolts from the flywheel engine side into the torque ...

Question about Jeep Wrangler

1 Answer

...remove the torque converter bolts or nuts then lower the transmission remove the old and replace with the new and replace the transmission and the rest of parts make sure you torque your torque ...

...torque converter bolts have to come out to remove transmission ? Not sure if it varies depending on layout but the classic rear wheel drive transmission can be withdrawn leaving the torque converter ...

Not finding what you are looking for?
2004 Jeep Wrangler Logo

383 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...