2000 Jeep Wrangler "forward wont" Questions

Ad

Question about Jeep Wrangler

2 Answers

...wont come out of 4wd try this.Engage 4wd,go forward,then while going forward ride the brake.Stay on the brake,engage 2wd and select reverse.go back a few feet under power with your foot on the brake, ...

Ad

...wont drive forward in 2wd. just makes a loud grinding noise but will drive in reverse Was just driving down the road and Jeep started to squeal really loud then started making a loud grinding sound. ...

Ad

...wont got, it will not pull at all. change the spark plugs and wires similar problem after 20min cool down due to bad o2 sensor in exhaust manifold, and under certain driving conditions this problem ...

...forward clutch is slipping, it wont do that for long before you cant move at all, change your fluid and filter, and add lucas to the trans when you do, if you still have a problem, its over, you need ...

...forward. when you turn the car you stress the joint which is why you hear it when you turn. when the car suspension moves up and down it moves the joint in that direction which is why it gets lowder ...

...wont move forward or backward?? The other problem is for the last year it runs a little hot on the highway. Had the radiator rodded out, water pump replaced and a new thermostat, but still have the ...

Question about Jeep Wrangler

1 Answer

wont crank I recently bought an 88 wrangler, and I can't get it started. I put a new battery in it and replaced the starter. The lights work inside and out but when you turn the key nothing happens. I

Question about Jeep Wrangler

3 Answers

...wont work after my lift kit hey i bought a 1997 jeep wrangler and i got it lifted 4 inches on a body lift and my low lock no longer works what do i have to do to get it to work again? Your linkage is ...

...wont move forward or reverse, engine is good both solenoids for forward and reverse work. I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from ...

...wont start runs rough sometimes fuel system or ECU/sensor issue Also 3 problems I tracked down were: (1) mechanic was removing wiring from automatic shutdown relay (ASD) within fuse box in engine ...

Not finding what you are looking for?
2000 Jeep Wrangler Logo

491 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...