2000 Jeep Cherokee "changed master control window switch" Questions

control panel? How should I check? If it is bad, how would I go about changing? Thanks lightly pry the switch up from the driver's door and do the same with the other doors. Check the voltage from the

...this button or should i replace the whole window switch unit? Before changing the switch, I would check connections. The connection problem would be in the master switch...the one in the drivers

notice on the master window switch that the rear passenger control will push up but won't push down. Coul Not sure if the body control module or the master switch is bad change master switch first

...window operation and when the lockout switch is open, power is cut to the passenger door switches disabling window operation. Normal window operation is still available from the driver master

...window dont go up the other three only go up with center concel and they dont work with the door panel button The master switch usually controls the lock-out of the other switches. I would start by ...

changed the master switch but still nothing. Any ideas? loose fuse, or weak fuse (micro cracks) or bad wires , bad connectors it can only be 3 things, power fuse, wires, switch or motor. cant be motor

...changed the lock actuator, door switch and even ran a temporary jumper from the switch to the actuator (then the door would unlock but not lock and no other doors would lock)) I was told to ...

...master sw also.no pwr to pass motor. changed passenger sw . no pwr at pass motor. Replace the master switch assembly. You don't just replace the master switch on someones say so . If you don't know ...

...control switches and still nothing works, the 2nd Part. the drivers door switch is the master switch i would take a test light and check to see if the drivers door swich is sending 12 volts to other ...

...master control unit which is on the driver side u might need to replace the unit which controls all of the windows and lock...check this link ...