1998 Jeep Wrangler "key switch stuck position 2007" Questions

...key it for me to match original at no extra charge. The ignition switch is probably too full of metal filings from the keys and worn parts. Try flooding the switch with WD-40 to flush it out! It ...

...w/ a 2007 xc70 try this: ...

...3 ignition switch is shorted internally. I would try tapping the starter motor with a hammer or steel bar then turning the key to the on position... If the problem is gone replace the

...switch and wiggle the key back and forth. You have some tumblers stuck in the switch. Turn the switch off a and on to lubricate it as well. Do not force anything or damage the key. It is possible to ...

...You could try moving the shifter before you turn the key switch to the on position. The brake pedal sends a signal to the shift lock solenoid to unlock it. That circuit would need to be

...key. Press brake when moving from gear to the park position and make sure that even if the park is selected - that the car is actually in park.There should also be a bypass switch that ...

...position. If this does not work then check if the steering lock is not stuck. Move the steering wheel left and right a few times and see if the ignition key moves. Otherwise a trip to the

...switch and feeds the starter relay coil. The ECM/PCM then grounds the control circuit of the starter relay. When the starter relay is energized it allows battery positive voltage to the starter ...

...switch, usually when you start it the key moves back a little out of the start position, make sure this is happening. Can you hear the starter when you are in neutral and idling? If so, the gear is ...

...key stuck in ignition, wont shift out of park and most electronics wont work (radio, power windows, etc) i changed the break switch . what else could it be? The ignition switch is very close to the ...